MENU
Our website has been renewed!
  1. HOME
  2. Download
  3. D-Cut Master for Windows download

D-Cut Master for Windows download

This software is for outputting AutoCAD R13 format DXF files to Graphtec cutting plotters. This is an upgrade kit for D-Cut Master which cannot be installed without the previous version.

Software License Agreement

It is required to review the following license agreement before the software is downloaded. We will be deemed that the customer has to agree to the terms and conditions of the license agreement when the software had been downloaded by the customer. Please note that it is not possible to download or use the software if the customer does not agree to it.

GRAPHTEC SOFTWARE LICENSE AGREEMENT (GSLA)

Downloading Files

Ver.2.12 (Latest version)

Date of updated19 Jul, 2007
Supported ProductsFC4500 series / FC2250 series
Supported OS(*1)Windows 7 / Windows 7 x64 EditionUltimate / Enterprise / Professional / Home Premium / Home Basic
Windows Vista / Windows Vista x64 EditionUltimate / Enterprise / Business / Home Premium / Home Basic
Downloading filesSoftwareOPS639v212.zip (2,080KB)
  1. In the 64-bit environment of Windows Vista / Windows 7, it operates in 32-bit compatibility mode.

Revision History

Ver.2.01

  1. Supported Windows Vista.
  2. Changed the supported OS from Help and README.TXT to Windows from 2000.
  3. Supported HTML Help.
  4. Added a function that can specify the file name in order to solve the problem that [Output to file] dialog box is not displayed during cut output (direct output) when the driver’s output port is “FILE:” in the Vista environment.
  5. Fixed the problem where the start and end points were incorrect when rotating and outputting an ellipse.
  6. Fixed the problem that DXF data created in Mac environment could not be properly read with only ‘CR’ line feed code.
  7. Fixed the problem that the Move command was not always output at the beginning of data writing.
    (When the coordinate at the beginning of writing was (0,0), it was the same as the initial value of (0,0) of the current position coordinate and the Move command was not output and the plotting was not correct. Check by the matrix copy).

Ver.1.11

  1. First edition