Support > Software & Drivers

Cutting Master® for Windows

OPS640-WIN

OPS640-WIN Cutting Master Ver. 3.70a Update
Cutting Master is an output plug-in that enables the use of a Graphtec cutting plotter from within Adobe Illustrator on a Windows-based PC. This version upgrade kit can only be installed if you already have an earlier version of Cutting Master for Windows, or if you have one of the following CD-ROM's supplied as a standard accessory when you purchased your Graphtec Cutting Plotter:

<FC5100 series>
PN: 53801-079T
PN: FC5100-CDM01M
PN: FC5100-CDM02M
PN: FC5100-CDM03M
PN: FC5100-CDM04M
PN: FC5100-CDM06M
PN: FC5100-CDM07M

<CE3000 series>
PN: CE3000-CDM01E
PN: CE3000-CDM02M
PN: CE3000-CDM03M

Please be sure to read the instructions in the Readme.txt file carefully before installing the driver.

  1. You must read and agree to the terms of use of software on this site before downloading or using any software on this site or any Graphtec-controlled server
  2. Please tbe sure to read the instructions carefully before installing the driver
  3. Click on the filename to copy it to a temporary directory on your hard disk
  4. Use PKUNZIP or compatible program to decompress the files.