Support > Software & Drivers
OPS628 Overview
Graphtec Plotter Driver OPS628
for Microsoft Windows 95 / 98 / Me / Windows NT 4.0 / Windows 2000 / Windows XP
Thank you for choosing the Graphtec OPS628 Plotter Driver.
The OPS628 Plotter Driver can be used with the following models:
Pen Plotters
- MP5100/5200/5300
- FP8100/8200/8300
- FP9100/9200
- GX3000AP
- CE2000-120AP
- PT-5M
Cutting Plotters
- FC2230
- FC3100
- FC3200-50
- FC3600
- FC4100/4200
- FC5100
- FC612-09
- CE1000-60
- CE2000-60/2000-120
- CE3000-40/3000-60/-3000-120
Penless Plotters
- TM1030/1130
- TM1040/1140/1240
- TM1031/1131
- TM1220/1300
Inkjet Plotters
- JC9000/9100
- JX1130/1060
- JX2100/2150
Although proper operation cannot be guaranteed, the following earlier models can be used with this plotter driver by selecting the corresponding plotter model indicated on the right:
| Pen Plotters |
| . |
GP1000/1050/2000/2050/3000 series |
GX3000 |
| . |
GX1000/2000/2010 series |
GX3000 |
| . |
FP6300/6200/6250/6150/7000 series |
FP8000 |
| . |
MP3000/4000 series |
MP5000 |
| Cutting Plotters |
| . |
FC2200 series |
FC2230 |
| . |
FC2100 series |
FC4100 |
| . |
FC3100 series |
FC4100 |
| Penless Plotters |
| . |
EM3100/3010 series |
TM1030/1130 |
| . |
TM1210/1110/1010 series |
TM1030/1130 |
| . |
TP2200-RV, GC1300-R series |
TM1220/1300 (raster) |
| . |
TP2200-CV, GC1300-S series |
TM1220/1300 (solid) |
| . |
GC1210 series |
TM1030/1130 |
The README.TXT file in each directory contains instructions on installation and operation as well as other notes. Be sure to read them carefully before installing or using this driver.
Before you begin installation, check that the program disk contains the following:
For Windows 95/98/Me *
- WIN9X_ME\GRAPHTEC.DR_
- WIN9X_ME\GRAPHTEC.HLP
- WIN9X_ME\GTCUPMON.DL_
- WIN9X_ME\GTCUSBP.SY_
- WIN9X_ME\OEMSETUP.INF
- WIN9X_ME\USBPRINT.INF
- WIN9X_ME\README.TXT
For Windows NT4.0
- WINNT40\DISK1
- WINNT40\GPGL.DL_
- WINNT40\GPGLUI.DL_
- WINNT40\GPGLUI.HLP
- WINNT40\OEMSETUP.INF
- WINNT40\README.TXT
- WINNT40\GX3000.GPD
- WINNT40\MP5000.GPD
- WINNT40\FP8000.GPD
- WINNT40\FP9000.GPD
- WINNT40\PT5M.GPD
- WINNT40\CE1000.GPD
- WINNT40\CE2000.GPD
- WINNT40\CE2120AP.GPD
- WINNT40\CE3000.GPD
- WINNT40\FC2230.GPD
- WINNT40\FC3200.GPD
- WINNT40\FC3600.GPD
- WINNT40\FC4100.GPD
- WINNT40\FC4200.GPD
- WINNT40\FC5100.GPD
- WINNT40\FC612.GPD
- WINNT40\TM1040.GPD
- WINNT40\TM1030.GPD
- WINNT40\TM1031.GPD
- WINNT40\TM1220.GPD
- WINNT40\TM1220B.GPD
- WINNT40\TM1220S.GPD
- WINNT40\TM1220R.GPD
- WINNT40\JC9000.GPD
- WINNT40\JX1000.GPD
- WINNT40\JX2000.GPD
For Windows 2000 / Windows XP
- WIN2K_XP\DISK1
- WIN2K_XP\OEMSETUP.INF
- WIN2K_XP\README.TXT
- WIN2K_XP\GX3000.GPD
- WIN2K_XP\MP5000.GPD
- WIN2K_XP\FP8000.GPD
- WIN2K_XP\FP9000.GPD
- WIN2K_XP\PT5M.GPD
- WIN2K_XP\CE1000.GPD
- WIN2K_XP\CE2000.GPD
- WIN2K_XP\CE2120AP.GPD
- WIN2K_XP\CE3000.GPD
- WIN2K_XP\FC2230.GPD
- WIN2K_XP\FC3200.GPD
- WIN2K_XP\FC3600.GPD
- WIN2K_XP\FC4100.GPD
- WIN2K_XP\FC4200.GPD
- WIN2K_XP\FC5100.GPD
- WIN2K_XP\FC612.GPD
- WIN2K_XP\TM1040.GPD
- WIN2K_XP\TM1030.GPD
- WIN2K_XP\TM1031.GPD
- WIN2K_XP\TM1220.GPD
- WIN2K_XP\TM1220B.GPD
- WIN2K_XP\TM1220S.GPD
- WIN2K_XP\TM1220R.GPD
- WIN2K_XP\JC9000.GPD
- WIN2K_XP\JX1000.GPD
- WIN2K_XP\JX2000.GPD
- WIN2K_XP\GTCGLMON.DL_
For Color Adjustment
- COLOR\JC80AXPM.TB_
- COLOR\JC80AXST.TB_
- COLOR\JC80AXTC.TB_
- COLOR\JC80AXTM.TB_
- COLOR\JC80JRPF.TB_
- COLOR\JC80PRG.TB_
- COLOR\JC80RVLM.TB_
- COLOR\PRG.JX_
Precautions to be observed when connecting the FC5100, CE3000, or FC3600 via USB:
* Supported OS's: Windows 98/Me, Windows 2000 Professional, or Windows XP
* The plotter does not operate under Windows 3.1/95 or Windows NT
* Operation with other than the included driver is not guaranteed.
* Do not connect multiple plotters to a single computer.
* Operation is not guaranteed if the plotter is connected to a USB hub or to a USB extension board.
END