Support > Software & Drivers

DADiSP SPL for DQ Series Overview

 

The DADiSP SPL imports and converts measured data from the DQ1000/2000 (Binary format) to the DADiSP format.

Restrictions:

(1) Can only be used with DQ1000/2000 M, MP and MF amp types
(2) Can only be used with DQ1000/2000 .gbd files

Installation:

Copy the following SPL files to the DADiSP directory.

dadisp.spl
dq1000.spl
ch_sel.MEN

Data import

Run DADiSP.

The following “DQ1000/2000” menu button is displayed:

Click the“DQ1000/2000” button, to display the following “DQ1000/2000 file read” window.
Click the “Open” button, to display the following “Format Selection Menu” window.

Select a format and click the “OK” button.

* When “Single channel” is selected, the following “Channel Selection Menu” window is displayed.

Select a channel and click the “OK” button.

Measured data is then converted to the DADiSP data format, and displayed in the DADiSP windows.

Note:

1. This conversion overwrites the waveform on the DADiSP window.
2. If the number of windows is fewer than the number of measured data channels, the following message appears at the bottom of the DADiSP window.