Support > Software & Drivers

Direct Plotters

Note - the widely-used OPS628 driver offers several "subdrivers" during installation. The correct one to use for your product is shown in the column labeled "OPS628 Sub-driver."

Note - R13 ADI DOS drivers are not available.

Pen Plotters	Win 3.1	Win 95/98/Me	Windows NT4.0/2000/XP	OPS628 Sub-driver	R12 ADI  Windows	R13 ADI Win3.1/95/98, Win-NT3.51/NT4.0	R14/ LT97/LT98	AutoCAD 2000 LT 2000	AutoCAD 2000i LT 2000i	AutoCAD 2002 LT 2002	Win95 Raster Driver
GC1300-R	nc	OPS628	OPS628	TM1220/1300 (RASTER)	nc	nc	nc	nc	nc	nc	OPS617
GC1300-S	OPS608	OPS628	OPS628	TM1220/1300 (SOLID)	nc	nc	nc	nc	nc	nc	nc
JC9000/9100	OPS608	OPS628	OPS628	JC9000/9100	nc	nc	OPS630 plp032.dll	OPS633	OPS637	OPS641	nc
EM3010/3110	OPS608	OPS628	OPS628	TM1030/1130	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	OPS641 *1	nc
TM1010	OPS608	OPS628	OPS628	TM1030/1130	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	OPS641 *1	nc
TM1030, TM1130	OPS608	OPS628	OPS628	TM1030/1130	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	OPS641 *1	OPS617
TM1031, TM1131	OPS608	OPS628	OPS628	TM1031/1131	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	nc	nc
TM1110	OPS608	OPS628	OPS628	TM1030/1130	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	OPS633	OPS637	nc	nc
TM1210	OPS608	OPS628	OPS628	TM1030/1130	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	nc	nc
TM1220	OPS608	OPS628	OPS628	TM1220/1300 (STD)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	OPS633	OPS637	nc	nc
TM1040, TM1140, TM1240	OPS608	OPS628	OPS628	TM1040/1140/ 1240	OPS610 plp030.dll	OPS624 plp030/031.dll	OPS630 plp030/031.dll	OPS633	OPS637	OPS641 *1	OPS617
TM1300	OPS608	OPS628	OPS628	TM1220/1300 (STD)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	OPS633	OPS637	nc	nc
TM1220, TM1300	OPS608	OPS628	OPS628	TM1220/1300 (BINARY)	nc	OPS624 plp031.dll	OPS630 plp031.dll	OPS633	OPS637	nc	nc
TM1300, TM1220	OPS608	OPS628	OPS628	TM1220/1300 (RASTER)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	OPS633	OPS637	nc	OPS617
TM1300, TM1220	OPS608	OPS628	OPS628	TM1220/1300 (SOLID)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	OPS633	OPS637	nc	nc
TP2200-CV	OPS608	OPS628	OPS628	TM1220/1300 (SOLID)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	nc	nc	nc	nc
TP2200-RV	nc	OPS628	OPS628	TM1220/1300 (RASTER)	OPS610 plp030.dll	OPS624 plp030.dll	OPS630 plp030.dll	nc	nc	nc	OPS617

*1

With the EM3010, EM3110, and TM1010 models, use of the binary commands requires a binary command option. Note also that this driver does not support any TM1110 model that has a resolution of 406 dpi.
In the case of GP frame plotters, te OPS641 driver only supports GP series or GX series model that can handle roll paper (models wih a name that ends with an R, T, or C)