Cutting Plotters– Drivers / Software / Manuals / Firmware –
- Operation is not guaranteed after warranty period is expired.
- Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
ROLL FEED CUTTING PLOTTER
FC9000 series
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20
FC8600 series DISCONTINUED
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.7.66 / [Mac] Ver.1.7.66 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Windows] Ver.2.2.1252 / [Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.7.76 / [Mac] Ver.1.7.63 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20 - Cutting Master 3
[Windows] Ver.2.2.1252 / [Mac] Ver.2.2.1252 - Cutting Master 2
[Windows 8.1/7] Ver.2.00
[Mac OS X 10.4～10.10] Ver.1.99 - Cutting Plotter Controller
[Windows] Ver.1.50C
CE8000series
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36
MANUALS
- Setup manual
(5 Languages) - User manual
(CHN / DEU / ENG / ESP / FRA / ITA / KOR / PTG / RUS) - To Ensure Safe and Correct Use of Cutter
- Cutter blade manual
(CHN / ENG / ESP / KOR / PTG) - Test chart of registration mark
- OPH-A45 Installation manual
ASF1-30 for CE8000
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
FIRMWARE
Please update CE8000 firmware to the latest version.
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36
CE8000-130AP
CE7000 series
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20
F-Mark2 for CE7000
FIRMWARE
Please update CE7000 firmware to the latest version.
SOFTWARE
- iMark Plus
[Windows] Ver.9.4.5H
CE7000-130AP
CE LITE-50 DISCONTINUED
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.7.66 / [Mac] Ver.1.7.66 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.7.76 / [Mac] Ver.1.7.63 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20 - Silhouette Studio
[Windows 32bit] Ver.4.3.284
[Windows 64bit] Ver.4.3.284
[Mac] Ver.4.3.356
CE6000 PLUS DISCONTINUED
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.7.66 / [Mac] Ver.1.7.66 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.7.76 / [Mac] Ver.1.7.63 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20 - Cutting Plotter Controller
[Windows] Ver.1.51A
F-Mark for CE6000 DISCONTINUED
FIRMWARE
Please update CE6000/PLUS firmware to the latest version.
SOFTWARE
- iMark
[Windows] Ver.8.1.6H
MANUALS
- Software manual
(English) - Setup user’s manual
(English) - FAQ
(English / Chinese (常见的问题))
FLATBED CUTTING PLOTTER
FCX4000
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20
MANUALS
- Setup manual
(English) - User manual
(English) - To Ensure Safe and Correct Use of Cutter
- Cutter blade manual
(English) - Test chart of registration mark
FCX2000
DRIVERS
- [Windows 11] 64-bit Edition Ver.4.30
FIRMWARE
SOFTWARE
- Graphtec Studio 2
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Graphtec Pro Studio/Plus
[Windows] Ver.4.10 - Graphtec Studio
[Mac] Ver.3.0.035 - Cutting Master 5
[Windows] Ver.1.10.36 / [Mac] Ver.1.10.36 - Cutting Master 4
[Windows] Ver.4.90 / [Mac] Ver.5.20
MANUALS
- Setup manual
(English) - User manual
(English) - To Ensure Safe and Correct Use of Cutter
- Cutter blade manual
(English) - Test chart of registration mark