Support > Hardware
KW3300, 4300, 4600
Note: these pages are excerpted from the User's Manual part number KW4300-UM-151.
Serial Mouse Mode
DIP Switch Settings and Functions DT Commands HDG Commands
Bit Pad II Commands MM Series Commands Serial Mouse Mode
Serial Mouse Mode
DIP Switch Functions
- (1)
- Settings of DIP Switch 1
The bits of this switch must be fixed to the settings shown below.
| Function | DIP Switch 1 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| Fixed to OFF | OFF | OFF | |||||||
| Resolution | 0.4 mm | OFF | OFF | ||||||
| Fixed as indicated | ON | OFF | ON | ON | |||||
- (2)
- Settings of DIP Switch 2
The bits of this switch select the default settings of the RS-232C interace conditions.
| Function | DIP Switch 2 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| Fixed to OFF | OFF | ||||||||
| Data length | 7 bits | ON | |||||||
| 8 bits | OFF | ||||||||
| Parity bit | NONE | OFF | -- | ||||||
| ODD | ON | OFF | |||||||
| EVEN | ON | ||||||||
| Stop bits | 1 bit | ON | |||||||
| 2 bits | OFF | ||||||||
| Baud rate | 19200 bits/s | ON | ON | ON | |||||
| 9600 " | OFF | ||||||||
| 4800 " | OFF | ON | |||||||
| 2400 " | OFF | ||||||||
| 1200 " | OFF | ON | ON | ||||||
| 600 " | OFF | ||||||||
| 300 " | OFF | ON | |||||||
| 150 " | OFF | ||||||||
- (3)
- Settings of DIP Switch 3
The bits of this switch select the default settings of the RS-232C interface conditions and terminator character.
| Function | DIP Switch 3 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||
| Command mode | OFF | OFF | ON | ||||||
| Stylus pen | OFF | ||||||||
| 4-button cursor | ON | ||||||||
| Beeper | Enabled | ON | |||||||
| Disabled | OFF | ||||||||
| Fixed to OFF | OFF | OFF | OFF | ||||||
