Support > Hardware

KW3300, 4300, 4600

MM Command Set

4.0 DIP Switch Settings and Functions 7.1 DT Commands 7.2 HDG Commands
7.3 Bit Pad II Commands 7.4 MM Series Commands 7.5 Serial Mouse Mode

7.4 MM Command Set

7.4.1 DIP Switch Functions

(a)

Settings of DIP Switch 1
The bits of this switch select the default settings of the resolution, output format, data transmission mode, and data transfer rate.

Function		SW1
		1	2	3	4	5	6	7	8
Output format	ASCII	ON
	Binary	OFF
Resolution	500 lpi		ON
	0.1 mm		OFF
Data transmission mode	Remote mode			OFF	OFF
	Point mode				ON
	Switch stream mode			ON	OFF
	Stream mode				ON
Data transfer rate	max/32					ON	ON
	max/8						OFF
	max/2					OFF	ON
	max						OFF
Fixed to OFF								OFF	OFF

(b)

Settings of DIP Switch 2
The bits of this switch select the default settings of the RS-232C interface conditions and terminator character.

(c)

Settings of DIP Switch 3
The bits of this switch select the detault settings of the command mode (MM emulation), coordinate pointer, and beeper mode.