Item Description
Configuration Grit rolling type
Drive method Digital servo drive
Max. cutting area (W x L) (*1) 1220 mm × 50 m
Cutting area of guaranteed accuracy (*1) 1200 mm × 3 m
Mountable media width (*2) Min. 594 mm
Max. 1321 mm
Mountable roll media inside-diameter 3 inches
Mountable roll media outside-diameter Max. 200 mm
Mountable roll media mass Max. 20 kg
Number of push rollers 5 rollers
Cutting speed Max. 600 mm/s at all direction
Cutting force Max. 4.41N (450gf )
Mechanical resolution 0.005 mm
Programmable resolution GP-GL:0.1 / 0.05 / 0.025 / 0.01 mm
HP-GLTM (*3):0.025mm
Repeatability Max. 0.1 mm in plot up to 2 m (*1)(*4)
Mountable number of tools 2 tool
Pen types Oil-based ballpoint pen, Water-based fiber-tip pen
Interface USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory 2MB
Command sets GP-GL / HP-GLTM (*3) (Set by command)
Display Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
Power source 100V to 120V AC, 200V to 240V AC, 50/60 Hz (Auto switch)
Power consumption 100W
Operating environment 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 18 to 28 ºC, 40 to 65 % R.H. (non-condensing)
External dimensions (W x D x H) Approx. 1704 × 1148 × 1215 mm (Including Stand and Basket)
Weight Approx. 60kg (Including Stand and Basket)
Compatible OS (*5) Windows 10 / 8.1 / 7
This is the specialized model for high grade fine paper for apparel use.
Operated with Graphtec specified cutting condition and media.
Mountable media width. The minimum paper width with guaranteed accuracy is the width when the push rollers are placed on 5mm inside of both side of media. Sheet paper (cut paper) is not guaranteed.
HP-GL™ is a registered trademark of Hewlett-Packard Company.
Graphtec specified Mylar film is used to check the accuracy.
Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.

Standard accessories

Item Description Q'ty
Power cord The type of cord is different by destination. 1
USB Cable 2.9m long 1
Cutter Blade Holder PHP33-CB09N-HS 1
Cutter Blade CB09UB-1P 1
Loupe PM-CT-001 1
Stand for CE7000-130AP ST0121, Stand with Basket 1
Ballpoint pen holder PHP34-BALL 1
Oil-based ballpoint pen KB700-BK (Black) 1
CD-ROM User manual, Windows driver 1
Printed document Setup Manual, Cutter Blade Manual and Safety Manual 1


Unit : mm, Tolerance : ± 5mm