Instrument products > Lineacorders and Servo Corders
WR3320
| AL3301 | AH3301 | AL3302 | AH3302 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| No. of channels | 2/4/6/8/12 | 1/2/3/4/6 | ||||||||
| Amplitude | 40 mm per channel | 80 mm per channel | ||||||||
| Chart drive | Stepper motor | |||||||||
| Paper feed speed | 5, 10, 25, 50, 100, 250, and 500 mm/m or mm/s, and EXT (50 mm/s max.) (accuracy: ±0.2% ±0.5 mm) | |||||||||
| Recording paper | 100 m roll or Z-fold, blue or black trace | |||||||||
| Input format | Floating ground with guard shield | |||||||||
| Input resistance | 1 MOhm constant | |||||||||
| Maximum permissible input voltage | 500 V d.c. (including common mode voltage) | |||||||||
| Measurement range (switching accuracy) | 5, 10, 20, 50, 100, 200, 500, 1000 mV 0.5, 1, 2, 5, 10, 20, 50, 100 V/cm ±1% (reference range: 500 mV/cm) |
1, 2, 5, 10, 20, 50, 100, 200, 500 mV 1, 2, 5, 10, 20, 50, 100, 200, 500 V/cm ±1% (reference range: 500 mV/cm) |
2.5, 5, 10, 25, 50, 100, 250, 500 mV 0.25, 0.5, 1, 2.5, 5, 10, 25, 50 V/cm ±1% (reference range: 250 mV/cm) |
0.5, 1, 2.5, 5, 10, 25, 50, 100, 250 mV 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250 V/cm ±1% (reference range: 250 mV/cm) |
||||||
| Accuracy | Within ±0.5% of full-scale (including non-linearity and deadband) | |||||||||
| Sensitivity adjustment | Continuously variable over measurement range | |||||||||
| Zero setting | Can be set to any desired position in full-scale (AL/AH3301: 40 mm; AL/AH3302: 80 mm) | |||||||||
| Calibration voltage | Twice measurement range (20 mm) | Four times measurement range (40 mm) | ||||||||
| CMRR | DC: 130 dB AC: 110 dB |
DC: 140 dB AC: 120 dB |
DC: 130 dB AC: 110 dB |
DC: 140 dB AC: 120 dB |
||||||
| Input filter | -40 dB / -20 dB at 50 Hz | |||||||||
| Frequency response (1 Hz reference) |
10 mm p-p: 0 to 140 Hz (±0.5 dB) 20 mm p-p: 0 to 100 Hz (±0.5 dB) 40 mm p-p: 0 to 60 Hz (±0.5 dB) |
20 mm p-p: 0 to 60 Hz (±0.5 dB) 40 mm p-p: 0 to 45 Hz (±0.5 dB) 80 mm p-p: 0 to 30 Hz (±0.5 dB) |
||||||||
| Time marker | One mark each 1 or 10 sec, or 1 or 10 min. (accuracy: ±0.1%), and remote control by external contact closure or TTL signal | |||||||||
| Event marker | Push-button operation, or external control (contact closure or TTL signal) | |||||||||
| Remote paper feed START/STOP | External contact closure or TTL signal | |||||||||
| Remote pen heater ON/OFF | External contact closure or TTL signal | |||||||||
| Paper end alarm | When paper runs out, a beeper alarm sounds and recorder operation stops | |||||||||
| Paper rewind | Pushbutton operation (rewinds up to 5 m of roll paper at 100 mm/s speed) | |||||||||
| Annotation option | Self-generated annotation: Date, time (elapsed or real) and chart speed Alphanumeric input: ASCII characters via built-in 8-bit parallel port. This feature is optional. |
|||||||||
| Operating environment | 0 to 45°C, 30 to 85% RH | |||||||||
| Power requirements | 100, 117, 220, 240 VAC ±10% (switch selectable except for 1- and 2-channel models), 50/60 Hz | |||||||||
| Power consumption (approx) L (H):at 10 mm p-p and 120 Hz DL (DH) :at 20 mm p-p and 60 Hz |
2L (H) | 4L (H) | 6L (H) | 8L (H) | 12L (H) | 1DL (H) | 2DL (H) | 3DL (H) | 4DL (H) | 6DL (H) |
| 205 VA | 285 VA | 365 VA | 445 VA | 505 VA | 155 VA | 185 VA | 215 VA | 245 VA | 305 VA | |
| Outer dimensions (mm) (within ±3 mm) | 430 (W) x 187 (H) common | |||||||||
| 199 (D) | 289 (D) | 379 (D) | 450 (D) | 649 (D) | 199 (D) | 289 (D) | 379 (D) | 450 (D) | 649 (D) | |
| Weight (approx.) | 13 kg | 18 kg | 24 kg | 28 kg | 41 kg | 12 kg | 16 kg | 20 kg | 23 kg | 34 kg |
| Printing function | A-380 A-381 |
For 2- & 4-ch models For 6-, 8- & 12-ch models |
|---|---|---|
| Metal dustproof cover | A-305 A-306 A-307 A-308 A-309 |
For 2-ch model For 4-ch model For 6-ch model For 8-ch model For 12-ch model |
| Roll paper take-up unit | A-321 A-322 A-323 A-324 A-325 |
For 2-ch model For 4-ch model For 6-ch model For 8-ch model For 12-ch model |
| Rack-mount brackets | A-331 A-332 A-333 A-334 A-335 A-336 A-337 |
For 2-ch model, inch For 4-ch model, inch For 6-ch model, inch For 8-ch model, inch For 2-ch model, DIN For 4-ch model, DIN For 6-ch model, DIN |
| Optional chart speeds | A-311 (1/2 standard) A-312 (1/10 standard) A-313 (1/20 standard) |
2.5, 5, 12.5, 25, 50, 125, 250 mm/s, mm/min, and EXT. 0.5, 1, 2.5, 5, 10, 25, 50 mm/s, mm/min, and EXT. 0.25, 0.5, 1.25, 2.5, 5, 12.5, 25 mm/s, mm/min, and EXT. |
| 200 m Z-fold paper supply box | A-326 A-327 A-328 A-329 A-330 |
For 2-channel model For 4-channel model For 6-channel model For 8-channel model For 12-channel model |
|---|---|---|
| Acrylic dustproof cover | WDC-201 WDC-202 WDC-203 WDC-204 WDC-205 |
For 2-channel model For 4-channel model For 6-channel model For 8-channel model For 12-channel model |
| User's manual | 1 |
|---|---|
| Chart paper | 1 roll |
| Input cables | Required channels |
| Fuses | 2 |
| Soft plastic cover | 1 |
| Storage bag for accessories | 1 |
| Philips screwdriver (3 mm) | 1 |
| Flatblade srewdriver (2 mm) | 1 |
| Allen wrench (3 mm) | 1 |
| Power cable | 1 |
| Remote controls input connector | 1 |
| Cable for calibrated output | 1 |