Instrument products > midi LOGGER

GL800

GL800 Main Unit Specifications

Item		Description
Number of analog input terminal units		1unit (20 ch) or Extension unit (max. 200 ch) Maximum 10 units or 500 ch when using with a PC
Sampling interval *1		100 ms (10 ch) to 1 h
Trigger function		Type	Start	(Data capture starts when a trigger is generated)
			Stop	(Data capture stops when a trigger is generated)
		Condition	Start	Off, Level, Alarm, Scheduled time, External
			Stop	Off, Level, Alarm, Scheduled time, Elasped time, External
Alarm function		Type	Analog, Logic, Pulse (AND and OR operation available)
		Condition	Analog	H, L, Window In, Window Out
			Logic	H, L at each channel
			Pulse	H, L, Window In, Window Out
Pulse / Logic input *2 *5		Selectable between Pulse and Logic, Number of channels : 4
Pulse input range	Count mode	50 C, 500 C, 5 kC, 50 kC, 500 kC, 5 MC, 50 MC, 500 MC/F.S. (max. input 50kHz)
	Inst. Mode	50 C, 500 C, 5 kC, 50 kC, 500 kC, 5 MC, 50 MC, 500 MC/F.S. (max. input 50kHz)
	RPM mode	50 rpm, 500 rpm, 5 krpm, 50 krpm, 500 krpm, 5 Mrpm, 50 Mrpm, 500 Mrpm/F.S. (max. input 50kHz)
Alarm output *5	No. of channels	4
	Output format	Open collector output (5V pull-up resistance 10 k ohm),5 to 24V (100 mA or less)
	Output conditions	Level judgement, Window judgement, Logic pattern judgement, Pulse judgement
External trigger input *2 *5		1 ch
Interface to PC		Ethernet (10BASE-T / 100BASE-TX), USB (Compatible with high speed)
Data storage function	Measured data	Internal flash memory or USB memory directly
	Other	Setting conditions and Screen hard copy can be saved into the internal memory or the USB memory
Internal storage device		Internal flash memory : 12 Mbyte
USB memory slot (Full speed)		Provided as standard
Calculation function	Statistics calculation	Average, Peak, maximum, Minimum, RMS
	Number of calculations	2 calculations can be set simultaneously
Searching function		Searching the necessary point from captured data. Type : Level, Alarm, Logic, Pulse
Display	Size	5.7 inch TFT color LCD
	Displayed items	Waveforms + Digital values, Waveforms only, Digital values only
Operating environment		Temperature : 0 to 45 °C (15 to 40 °C when operating by battery), Humidity : 5 to 85 % R.H.
Power supply		AC adapter : 100 to 240V AC, 50/60 Hz
		DC input : 8 to 24 V DC *3
		Battery pack : Max. 2 batteries installable, 9 hours operation (when using under Graphtec specified condition) *3
Power consumption		28 VA or lower (when operating with AC power)
External dimensions (W x D x H) (approx.)		232 mm x 152 mm x 50 mm
Weight (approx.)		990 g including a 20 channel input terminal unit *4
Vibration resistance		Compatible with JIS Vibration testing methods for automobile Type 1 Class A-equivalent
Certifications		CE, RoHS, China RoHS

GL800 Input Terminal Unit Specifications

Item			Description
Number of input channels			20 (maximum 200 channels by the expansion terminal unit)
Type of input terminal			M3 screw type terminal
Method			Scan All channels isolated, balanced input
Measurement range	Voltage		20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50V, 1-5 V/F.S.
	Temperature		Thermocouple : K, J, E, T, R, S, B, N, W (WRe5-26)
			RTD : Pt100, JPt100, Pt1000 (IEC751)
	Humidity		0 to 100 % RH (Voltage 0 to 1 V conversion, when using optional B-530 humidity sensor is used)
Input filter			Off, 2, 5, 10, 20, 40 (Moving average)
Measurement accuracy (23°C ± 5°C) When 30minutes or more have elapsed after power was switched on Sampling 1s/20ch Filter ON(10) GND connected	Voltage		± 0.1 % of F.S.
	Temperature		Measurement range	Accuracy
	Thermocouple	R/S	0 ≦ TS ≦ 100 °C	± 5.2 °C
			00 < TS ≦ 300 °C	± 3.0 °C
			R : 300 < TS ≦ 1600 °C	± (0.05 % of rdg + 2.0 °C)
			S : 300 < TS ≦ 1760 °C	± (0.05 % of rdg + 2.0 °C)
		B	400 ≦ TS ≦ 600 °C	± 3.5 °C
			600 < TS ≦ 1820 °C	± (0.05 % of rdg + 2.0 °C)
		K	-200 ≦ TS ≦ -100 °C	± (0.05 % of rdg + 2.0 °C)
			-100 < TS ≦1370 °C	± (0.05 % of rdg + 1.0 °C)
		E	-200 ≦ TS ≦ -100 °C	± (0.05 % of rdg + 2.0 °C)
			-100 < TS ≦ 800 °C	± (0.05 % of rdg + 1.0 °C)
		T	-200 ≦ TS ≦ -100 °C	± (0.1 % of rdg + 1.5 °C)
			-100 < TS ≦ 400 °C	± (0.1 % of rdg + 0.5 °C)
		J	-200 ≦ TS ≦ -100 °C	± 2.7 °C
			-100 ≦ TS ≦ 100 °C	± 1.7 °C
			100 < TS ≦ 1100 °C	± (0.05 % of rdg + 1.0 °C)
		N	0 ≦ TS ≦ 1300 °C	± (0.1 % of rdg + 1.0 °C)
		M	0 ≦ TS ≦ 2000 °C	± (0.1 % of rdg + 1.5 °C)
		* If the reference junction compensation is internal, add ± 0.5 °C to each of the above values.
	RTD	Pt100	-200 to 850 °C (FS = 1050 °C)	± 1.0 °C
		JPt100	-200 to 500 °C (FS = 700 °C)	± 0.8 °C
		Pt1000	-200 to 500 °C (FS = 700 °C)	± 0.8 °C
A/D converter			16 bit (out of which 14 are internally acknowledged)
Maximum input voltage			60 Vp-p (Between ±)
			60 Vp-p (Between input terminals)
			60 Vp-p (Between input terminal and chassis)
Withstand voltage			350 Vp-p (between input terminal and GND) 1 minute

*1

The available number of channels varies according to the sampling interval.

*2

Max. input voltage : 24 V, Input threshold voltage : approx. 2.5 V, Hysteresis approx. 0.5 V (+2.5 to 3 V)

*3

Option

*4

Excluding the battery and AC adapter

*5

Logic/Alarm cable (B-513) is required