Imaging products > Cutter / Plotters
FC4200 Series
| Parameter | FC4200-50 | FC4200-60 |
|---|---|---|
| Configuration | Flatbed | |
| Drive | Digital servo system | |
| Effective cutting area | 590 x 430 mm | 910 x 610 mm |
| Max loadable film width | 500 mm | 666 mm |
| Medium hold-down surface | Electrostatic adhesion sheet | Polyvinyl sheet |
| Max cutting speed | 650 mm/s | |
| Settable cutting speeds | 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 cm/s | |
| Cutting force | 10 to 600 gf | |
| Minimum character size | 5 mm2 (alphanumeric characters, but depends on material and font selected) | |
| Mechanical resolution | 0.005 mm | |
| Programmable resolution | GP-GL: 0.1, 0.05, 0.025, 0.01 mm HP-GL(TM): 0.025 mm *1 |
|
| Repeatability | Within 0.1 mm *2 | |
| Distance accuracy | Within ±0.2% of the distance moved, or ±0.1 mm, whichever is greater *2 | |
| Perpendicularity | Within 0.3 mm/430mm | Within 0.4 mm/610mm |
| Registration mark reading accuracy |
Within 0.3 mm *3 | |
| Number of cutters/pens | Two (one cutter and one pen) | |
| Cutter and pen types | Cutter blade: supersteel Pens: water-based ballpoint; oil-based ballpoint |
|
| Media types | Marking films (self-adhesive, fluorescent, and reflective vinyl) Stiff paper/card (for stencils, etc.) up to 0.5 mm thick *4 Compressed foam sheets up to 0.8 mm thick *5 Sandblast rubber up to 1.5 mm thick *5 High-intensity reflective film *6 |
|
| Interfaces | RS-232C serial and Centronics parallel (auto interface recognition) | |
| Buffer capacity | 2 MB | |
| Command sets | GP-GL and HP-GL(TM) emulation (control panel selectable) | |
| LCD display | 20 characters x 2 rows | |
| Power requirements | 100 to 120 VAC, 50/60 Hz 220 to 240 VAC, 50 Hz (please specify when ordering) |
|
| Power consumption | Within 120 VA | |
| Operating environment | +10 to +35° C, 35 to 75% RH (non-condensing) | |
| External dimensions W x D x H (approx.) |
857 x 780 x 200 | 1172 x 964 x 200 |
| Weight (approx.) | 19 kg | 26 kg *7 |
*1 When operated with Graphtec specified media and conditions
*2 HP-GL is a registered trademark of Hewlett-Packard Company
*3 When plotting the built-in test pattern using a water-based ballpoint pen on plain paper
*4 Use the CB15U or CB15U-K30 blade
*5 Use the CB15U-K30 blade
*6 Use the CB15UA blade
*7 Optional stand not included
| Power cable | 1 |
| Cutter holder (PHP32-CB15N) | 1 |
| Cutter blades (CB15U, 2 blades per pack) | 1 pack |
| Water-based ballpoint pens, one pack of five pens (KB540-S1) | 1 pack |
| Media positioning stickers | 1 sheet |
| User's Manual (FC4200-UM-151) | 1 |
| Windows driver (OPS628) | 1 |
| ST0032 | Stand for FC4200-60 |