Imaging products > Cutter / Plotters
CE5000-120AP
| Item | CE5000-120AP | |
|---|---|---|
| Configuration | Grit-rolling | |
| Drive system | Digital servo | |
| Cutting area | Maximum cutting area | 1164 x 50 m |
| Maximum guaranteed cutting area | 1164 x 3 m *1 | |
| Compatible medias | Media widths | 160 to 270, 300 to 400, 440 to 540, 580 to 680, 710 to 810, 850 to 950, 990 to 1090, 1120 to 1220 mm (the effective drawing area is the maximum obtainable area for the corresponding medium width) (1180 mm for the 2-inch core roll media) |
| Maximum roll media diameter | 190 mm | |
| Media types | Fine quality paper for apparel patterns (64 to 130 g/m2) Roll media core diameter : 2-inch, 3-inch |
|
| Maximum cutting speed | 60 cm/s | |
| Specifiable cutting speeds | 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s | |
| Cutting force | 20 to 300 gf (31 levels) | |
| Mechanical resolution | 0.005 mm | |
| Programmable resolution | GP-GL : 0.1/0.5/0.025/0.01 mm HP-GL : 0.025 mm *3 |
|
| Repeatability precision | Mechanical precision | Within 0.1 mm/3 m *2 |
| Guaranteed precision | Within 0.5 mm/3 m, continued 5 pages maximum (including cutter/pen exchange precision) *1 |
|
| No. of pens mountable | 2 | |
| Compatible cutter blade | Supersteel | |
| Compatible pen | Water-based fiber-tip pens, Oil-based ballpoint pens | |
| Interfaces | RS-232C/USB2.0 (full speed) | |
| Buffer capacity | 2 MB | |
| Command modes | GP-GL, HP-GLTM (control-panel selectable) *3 | |
| Display panel | LCD (16 characters x 1 row) | |
| Power supply | Rated power supply | 100 to 240 VAC, 50/60 Hz (automatic selection) |
| Power consumption | 100 VA | |
| Operating environment | Operating environment | 10 to 35 deg. C, 35 to 75 % RH (non condensing) |
| Conditions for guaranteed precision | 18 to 25 deg. C, 45 to 65 % RH (non condensing) | |
| External dimensions (W x D x H) | Approx. 1487 x 1020 x 1189 mm | |
| Weight | Approx. 43 kg | |
- *1
- When using Graphtec specified conditions.
Using Graphtec supplied apparel pattern paper Setting the paper load to 5 times, the paper ready time to 180 s Necessary to reload the media after cutting continuous 5 pages Only when the operating environment is not changed during cutting operation If the environment is changed, following s are added to the repeatability precision 0.1 mm/deg. C, 0.3 mm/10 % RH - *2
- When using Graphtec specied Mylar film
- *3
- HP-GLTM is a registered trademark of hewlett-Packard company