Imaging products > Cutter / Plotters

CE5000 Series

Item	CE5000-40-CRP	CE5000-60	CE5000-120
CPU	32-bit CPU
Configuration	Grit rolling
Drive system	Digital servo
Maximum cutting area	375 mm x 50 m	603 mm x 50 m	1213 mm x 50 m
Range of guaranteed precision	356 mm x 2 m*1	584 mm x 5 m*1	1194 mm x 5 m*1
Compatible media widths	Minimum: 50 mm Maximum: 484 mm	Minimum: 50 mm Maximum: 712 mm	Minimum: 85 mm Maximum: 1346 mm
Maximum media thickness	0.25 mm
Maximum cutting speed	60 cm/s (in all directions)		100 cm/s (45°direction)
Specifiable cutting speeds	1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s		1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, * cm/s
Cutting force	0.2-2.9N (20 gf to 300 gf) (31 levels)		0.2-4.4N (20 gf to 450 gf) (38 levels)
Minimum character size	Approximately 5 mm for alphanumeric characters (varies depending on the medium, font, etc.)
Mechanical resolution	0.005 mm
Programmable resolution	GP-GL: 0.1/0.05/0.025/0.01 mm; HP-GLTM *2: 0.025 mm
Repeatability precision	0.1 mm or less per 2 m*1
No. of pens mountable	1 pen
Compatible cutter type	Supersteel cutter blades
Compatible pen type	Water-based fiber-tip pens
Compatible cutting film	Marking film (PVC, fluorescent, or reflective film) up to 0.25 mm in thickness (excluding high-luminosity reflective film)
Interfaces	RS-232C/USB 2.0 (Full Speed)
Buffer capacity	2 MB
Command modes	GP-GL, HP-GLTM *2(selected on the control panel)
Display panel	Liquid crystal display (16 characters x 1 row)
Rated power supply	100 to 240 V AC, 50/60 Hz
Power consumption	100 VA
Operating environment	10°C to 35°C, 35% to 75% RH
Conditions for guaranteed precision	16°C to 32°C, 35% to 70% RH
External dimensions (W x D x H)*3	Approx. 623 x 285 x 223 mm	Approx. 851 x 585 x 1004 mm	Approx. 1,487 x 744 x 1194 mm
Weight*3	Approx. 9.4 kg	Approx. 25 kg	Approx. 40 kg

*1

Varies depending on the type of Graphtec-authorized film and the cutting conditions.

*2

HP-GLTM is a registered trademark of Hewlett-Packard Company.

*3

Including the stand