Roll Feed Cutting Plotter CE7000 series

Engineered to Achieve High Performance with Affordable Price

The Graphtec CE7000 Series is the perfect solution for those looking to increase production with greater efficiency for signage graphics, print & cut graphics, pop & packaging, automotive markets and many more. The rigidity has been enhanced compared to the previous model, which its feeding and cutting quality have also been improved.
Our newly developed Advanced Registration Mark Sensing System (ARMS) is installed which will raise the productivity with its variety of functions.

Cutting performance that guaranties accurate 5m length cutting. *

The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating.
In addition, by using an optional special basket, stability in long cuts can be achieved.

  • In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.

Data Link Function (Barcode Data Management/Continuous Cutting)

By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.

  • The USB flash memory format only supports FAT32. Please note that NTFS and exFAT are not supported.

Data output via USB flash memory without PC

When cutting data designed with Cutting Master 5 or Graphtec Studio 2 are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.

  • The USB flash memory format only supports FAT32.
    Please note that NTFS and exFAT are not supported.

Continuous Cut (Data Link function)

Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available.

Perforation cutting ability

Carrier Sheet Table

It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.

  • Available with CE7000-40 / -60.
  • In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table “OPH-A45”.


You can easily create and cut high quality designs with the standard included software.