| 3. Make preparations for cutting |
| 1 Load the printed sheet in your Craft ROBO and mount the cutter |
Make sure that the blade adjustment cap is [yellow], and then mount the cutter in the Craft ROBO.
(For details on how to replace the cap, please refer to the Quick Start Instruction Sheet).
Click the [Next] button to proceed to the ”Design Orientation” step. Click the [Next] button again to proceed to the ”Media loading” step. |
 |
Press the standby switch on your Craft ROBO and confirm that the LED lamp is lit.
Align the printed sheet with the guide line, and then turn the feed knob to feed it so that it is aligned with the top edge of the black cutting mat.
(For details on how to load media, please refer to the Quick Start Instruction Sheet). |
 |
| Close the top cover. Click the [Next] button to proceed to the ”Alignment” step. Click the [Next] button again to proceed to the ”Start cutting” step. |
 |
| 2 Perform Auto Registration Mark Reading |
| Click the [Cut...] button. The registration marks are read automatically. Do not touch the printed sheet during the reading operation, as this will affect the accuracy. |
 |
|
Top of Page